Visual FoxPro ODBC Driver Native Error Messages

The following tables list error messages native to the Visual FoxPro ODBC Driver.

001

1	Feature is not available.
2	Input/output operation failure.
3	Free handle is not found.
5	Use of unallocated handle.
99	Procedure canceled.

100

100	Too many files open.
101	Cannot open file.
102	Cannot create file.
105	Error writing to file.
107	Invalid key length.
109	Record is out of range.
110	Record is not in index.
111	Invalid file descriptor.
113	File is not open.
114	Not enough disk space for value.
115	Invalid operation for the cursor.
118	Index file does not match table.
119	No table is open.
120	File does not exist.
121	File already exists.
122	Table has no index order set.
123	Not a table.
125	Index expression exceeds maximum length.
127	You must use a logical expression with a FOR or WHILE clause.
128	Not a numeric expression.
129	Variable is not found.
132	File is in use.
133	Index does not match the table. Delete the index file and re-create the index.
135	End of file encountered.
136	Beginning of file encountered.
137	Alias is not found.
139	You must use a logical expression with FILTER.
142	Cyclic relation.
143	No fields were found to copy.
144	The LOCATE command must be issued before the CONTINUE command.
145	Must be a character or numeric key field.
146	Cannot write to a read-only file.
147	Target table is already engaged in a relation.
148	Expression has been re-entered while the filter is executing.
149	Not enough memory for buffer.
150	Not enough memory for file map.
155	Invalid buffdirty call.
156	Duplicate field names.
158	No fields found to process.
159	Numeric overflow. Data was lost.
162	Procedure 'value' is not found.
165	value is not related to the current work area.
170	Variable 'value' is not found.
171	Cannot open file value.
173	File 'value' does not exist.
174	'value' is not a memory variable.
175	'value' is not a file variable.
176	'value' is not an array.
177	Alias 'value' is not found.
180	File was not placed in memory using the LOAD command.
182	There is not enough memory to complete this operation.

200

200	Syntax error.
201	Too many names used.
202	Program is too large.
203	Too many memory variables.
205	Nesting error.
206	Recursive macro definition.
209	Line is too long.
210	Allowed DO nesting level exceeded.
211	An IF \| ELSE \| ENDIF statement is missing.
212	Structure nesting is too deep.
213	There is a missing keyword in the FOR...ENDFOR or DO CASE...ENDCASE command structure.
219	Command contains unrecognized phrase/keyword.
221	Command is missing required clause.
222	Unrecognized command verb.
224	Invalid subscript reference.
227	Missing expression.
228	Table number is invalid.
229	Too few arguments.
230	Too many arguments.
233	Statement is not allowed in interactive mode.
234	Subscript is outside defined range.
236	Suspend program before using RESUME.
238	No PARAMETER statement is found.
239	Must specify additional parameters.
240	Not a character expression.
250	Too many PROCEDURE commands are in effect.
252	Compiled code for this line is too long.
257	Key string is too long.
291	Expression used with ASIN() is out of range.
292	Cannot use 0 or negative as the argument for LOG10().
293	Expression used with ACOS() is out of range.
294	FOXUSER.DBF file is invalid.
295	Invalid path or file name.
296	Error reading the resource.
297	Command is allowed only in interactive mode.

300

301	Operator/operand type mismatch.
302	Data type mismatch.
305	Expression evaluated to an illegal value.
307	Cannot divide by 0.
308	Insufficient stack space.
337	Cannot nest the PRINTJOB command.

400

406	Printer is not ready.
407	Invalid argument used with the SET function.
410	Unable to create temporary work files.
423	Error creating the OLE object.
424	Error copying the OLE object to the Clipboard.
462	value internal consistency error.
465	SQL pass-through internal consistency error.
466	Connection handle is invalid.
467	Property is invalid for local cursors.
468	Property is invalid for table cursors.
469	Property value is out of bounds.
470	Incorrect property name.
471	Incorrect column format.
473	Environment-level property is invalid.
474	Invalid call issued while executing a SQLEXEC() sequence.
479	Invalid update column name \value\.
489	General fields cannot be used in the WHERE condition of an update statement. Change the WhereType property of the view.
491	No update tables are specified. Use the Tables property of the cursor.
492	No key columns are specified for the update table \value\. Use the KeyFieldList property of the cursor.
493	SQL parameter is missing.
494	View definition has been changed.
495	Warning: The key defined by the KeyField property for table value is not unique.
498	SQL SELECT statement is invalid.
499	SQL parameter value is invalid.

500

502	Cannot write to the record because it is in use.
503	File cannot be locked.
508	Error initializing OLE.
520	No database is open or set as the current database.
522	Connectivity internal consistency error.
523	Execution was canceled by the user.
525	Function is not supported on remote tables.
526	Connectivity error: value.
527	Cannot load ODBC library, ODBC32.DLL.
528	ODBC entry point missing, value.
530	Fetching canceled; remote table is closed.
532	Type conversion is not supported.
533	This property is read-only.
536	Function is not supported on native tables.
538	A stored procedure is executing.
540	Session number is invalid.
541	Connection value is busy.
542	Base table fields have been changed and no longer match view fields. View field properties cannot be set.
543	Type conversion required by the DataType property for field 'value' is invalid.
544	DataType property for field 'value' is invalid.
545	Table buffer for alias \value\ contains uncommitted changes.
546	Cannot close table during execution of table-bound expression.
547	Cannot insert an empty row from a view into its base table(s).
548	Table value has one or more non-structural indexes open. Please close them and retry the Begin Transaction.
549	Data session #value cannot be released with open transaction(s).
550	.DBC internal consistency error.
557	The database must be opened exclusively.
559	Property is not found.
560	Property value is invalid.
561	Database is invalid. Please validate.
562	Cannot find object value in the database.
563	Cannot find view value in the current database.
566	Cannot issue the PACK command on a database while its tables are in use.
567	Primary key property is invalid; please validate database.
570	Database is read-only.
571	The name value is already used for another
575	Object name is invalid.
577	Table value is referenced in a relation.
578	Invalid database table name.
579	Command cannot be issued on a table with cursors in table buffering mode.
580	Feature is not supported for non-.DBC tables.
581	Field value does not accept null value.
583	Record validation rule is violated.
585	Update conflict. Use TABLEUPDATE() with the lForce parameter to commit the update or TABLEREVERT() to roll back the update.
586	Function requires row or table buffering mode.
587	Illegal nested OLDVAL() or CURVAL().
589	Table or row buffering requires that SET MULTILOCKS is set to ON.
590	BEGIN TRANSACTION command failed. Nesting level is too deep.
591	END TRANSACTION command cannot be issued without a corresponding BEGIN TRANSACTION command.
592	ROLLBACK command cannot be issued without a corresponding BEGIN TRANSACTION command.
593	Command cannot be issued within a transaction.
594	Illegal to attempt a file lock in a transaction after taking prior record locks.
596	Table buffering is not enabled.
597	Views require either DB_BUFOPTROW or DB_BUFOPTTABLE.
598	Rule and trigger code must balance transaction usage.
599	Data session #value was forced to ROLLBACK all transactions to avoid deadlock.

600

601	Alias name is already in use.
602	Operation is invalid for a Memo, General, or Picture field.
612	No such menu or menu item is defined.
618	Menu has not been defined with DEFINE MENU.
624	Menu title has not been defined with DEFINE PAD.
625	Menu has not been defined with DEFINE POPUP.
631	Array dimensions are invalid.
637	File must be opened exclusively to convert the Memo file.
638	Field must be a Memo field.
649	No previous PRINTJOB command to correspond to this command.
651	CANCEL or SUSPEND is not allowed.
659	The table has memo fields that cannot be converted while open read-only.
683	Index tag is not found.

700

700	Record is in use by another user.
701	File must be opened exclusively.
702	File is in use by another user.
703	Record is not locked.
705	File access is denied.
706	Cannot sort .IDX files in descending order.
707	Structural .CDX file is not found.
708	File is open in another work area.
712	Field name is a duplicate or invalid.
714	Window 'value' has not been defined.
718	File is read-only.
722	Preprocessor expression is invalid.
734	Property value is not found.
737	value is a method, event, or object.
738	Property value is not a method or event.
740	value is a read-only property.
748	This file is incompatible with the current version of Visual FoxPro.
750	File was created in a later version of Visual FoxPro than the current version.
763	Property value already exists.
773	Database object type is invalid.
784	This object is derived from a base class and does not have a parent class.

800

802	SQL: Cannot locate table.
872	Too many columns.
879	No primary key.
884	Uniqueness of index value is violated.
885	Only structural tags can be defined as candidate.
886	Index does not accept NULL.
887	Illegal recursion in rule evaluation.
888	Tag name is too long.

900

901	Function argument value, type, or count is invalid.
902	Expression evaluator failed.
903	String is too long to fit.
904	** or ^ domain error.
905	LOG(): Zero or negative used as argument.
906	SQRT() argument cannot be negative.
912	Operation is invalid for a General field.
914	Code page number is invalid.
915	Collating sequence 'value' is not found.
918	File name is too long.
922	Volume does not exist.
923	Object value is not found.
924	value is not an object.
925	Unknown member value.
928	Statement is only valid within a class definition.
929	value can only be used within a method.
930	Cannot redefine value.
931	Statement is not in a procedure.
934	Statement is only valid within a method.
935	The current object does not inherit from class value.
937	Procedure file 'value' is not found.
938	Object is not contained in a value.
939	WITH/ENDWITH mismatch.
940	Expression is not valid outside of WITH/ENDWITH.
941	Error code is invalid.
942	Objects cannot be assigned to arrays.
943	Member value does not evaluate to an object.
945	The current object has been released.
947	Expression is too complex.
951	Cannot clear the object in use.
955	WIN.INI/registry is corrupted.
957	Error accessing printer spooler.
959	Invalid coordinates.
960	Illegal redefinition of variable value.
971	Cannot compile until the current COMPILE command has completed.
972	Array value is in use.
974	Arrays cannot be assigned to array elements.
976	Cannot resolve backlink.
988	Currency value is out of range.
990	Cancel.
999	Function is not implemented.